ALUMINUM SKELETON ASSEMBLY PIECE T-AP
55.5
/Box/QTY in Box 80 Pcs
Mevcut
Details of Usage: Lath Flooring
Raw Material: Recycled Polypropylene (PP)
Unit Weight: 25 gr
PACKAGE INTERNAL PRODUCT AMOUNT: 80 PIECES
USED TO CONNECT THE PEDESTAL WITH THE ALUMINUM SKELETON THAT WILL BE USED FOR LATH FLOORING.
APPLICATIONS for Lath Flooring:
Application can start from any corner.
More than one slope apparatus will be placed and used on the top of each other in line with slope ratio.
In this way, it will also allow high slopes to eliminate or reduce.
Slope apparatus with different circular slope degrees will be placed under the bottom basement and, if required, on top of it.
The frameworks will be placed on the carcass stabilizer found on the top basement of the pedestals but they will be fixed via screw hole with stainless screws before placing.
Final coating wood (decks) will be attached to construction and timber frame via stainless screws in the form of top screwing or hidden screwing, by leaving enough joint space.
Premium Pedestals with variable adjustment height that provide millimetric measure will be selected according to final elevation, and construction and timber frame will be supported with Premium Pedestals in a way that will reach to the determined final elevation.
T-AP is used to connect the pedestal and CP-P1 and equivalent skeletons, which are used to support tile and lath floorings.
Skeletons are attached to the piece by clicking.
PACKAGE MEASUREMENT: 27X27X25,5 CM (8 Pieces in 12X12X12 Boxes)
NOT APPLICABLE TO THE AUXILIARY PRODUCTS
More than one slope apparatus will be placed and used on the top of each other in line with slope ratio.
In this way, it will also allow high slopes to eliminate or reduce.
Slope apparatus with different circular slope degrees will be placed under the bottom basement and, if required, on top of it.
The frameworks will be placed on the carcass stabilizer found on the top basement of the pedestals but they will be fixed via screw hole with stainless screws before placing.
Final coating wood (decks) will be attached to construction and timber frame via stainless screws in the form of top screwing or hidden screwing, by leaving enough joint space.
Premium Pedestals with variable adjustment height that provide millimetric measure will be selected according to final elevation, and construction and timber frame will be supported with Premium Pedestals in a way that will reach to the determined final elevation.
T-AP is used to connect the pedestal and CP-P1 and equivalent skeletons, which are used to support tile and lath floorings.
Skeletons are attached to the piece by clicking.
PACKAGE MEASUREMENT: 27X27X25,5 CM (8 Pieces in 12X12X12 Boxes)
NOT APPLICABLE TO THE AUXILIARY PRODUCTS
