FEATURES
Single component, adhesive filler
High initial grip value reduces the need for initial support.
High bond strength and rapid hardening on almost all surfaces.
Adheres without primer, even to damp surfaces. (Thanks to the unique adhesion support of Soudaseal Mirror)
High-performance mechanical properties
Easy application even under adverse conditions
Sufficient application fluidity even at low temperatures.
Ecological advantages – Free of isocyanates, solvents, halogens, silicones and acids.
Maximum health and safety aspects
Resistant to many chemicals and moulds.
Does not stain non-porous surfaces such as natural stone, bluestone, marble and granite.
APPLICATIONS
Mirror adhesive/bonder applied directly to the back of the mirror (Mirrors must be resistant to acetone.)
Mirror adhesive and wall mirror adhesive for all types of surfaces
Joint filler for mirrored walls
Used in applications where water-resistant bonding is required.
USAGE INSTRUCTIONS
Apply Mirobond in vertical stripes on the back of the mirror using a triangular spray tip.
Depending on the size and weight of the mirrors, the distance between the vertical stripes should be equal and should vary between 10 cm and 20 cm.
Always apply the adhesive in vertical stripes on each edge of the mirror.
Application temperature: +5°C to +35°C
Cleaning: Immediately after application and before drying with white spirit or Surface Cleaner.
After hardening, clean mechanically.
Repair: With Soudal Mirror