MOVING JOINT STICK T-ST2
333
/Box/QTY in Box 6000 Pcs
Mevcut
Details of Usage: Tile Flooring
Raw Material: Recycled Polypropylene (PP)
Unit Weight: 0
50 gr
PACKAGE INTERNAL PRODUCT AMOUNT: 6000 PIECES
USED TO CREATE JOINT ON TOP OF THE PEDESTAL IN TILE FLOORINGS. WIDTH 2 MM.
The joint stick and its 2, 4, 6 and 8 mm of width alternatives can be rotated 360 degrees around their axis.
The length of these products is 16 mm and has an alterna- tive type with a length of 38 mm and a width of 4 mm.
NOT APPLICABLE TO THE AUXILIARY PRODUCTS
PACKAGE MEASUREMENT: 27X27X25,5 CM (8 Pieces in 12X12X12 Boxes)
APPLICATIONS for Tile Flooring: Application can start from any corner.
More than one slope apparatus will be placed and used on the top of each other in line with slope ratio.
In this way, it will also allow high slopes to eliminate or reduce.
Slope apparatus with different circular slope degrees will be placed under the bottom basement and, if required, by centering on top of it.
In accordance with calculations compatible with lining material dimensions to be used, Premium Pedestals will be placed through positioning (joint) lath placed on the middle positioning hole with 90 degrees found on the top basement.
Therefore, each corner of paving stone will be placed on one fourth of Premium Pedestals.
For 12 positioning holes found on top basement allow the application to perform with 30 degrees, the holes on the edge will be used for inclined cut.
Calibration differences encountered in the coating material will be eliminated by using 1-2-3-4 mm calibration adjusting shims designed to be placed on Premium Pedestals and shims can also be used in case of need for noise isolation.
The length of these products is 16 mm and has an alterna- tive type with a length of 38 mm and a width of 4 mm.
NOT APPLICABLE TO THE AUXILIARY PRODUCTS
PACKAGE MEASUREMENT: 27X27X25,5 CM (8 Pieces in 12X12X12 Boxes)
APPLICATIONS for Tile Flooring: Application can start from any corner.
More than one slope apparatus will be placed and used on the top of each other in line with slope ratio.
In this way, it will also allow high slopes to eliminate or reduce.
Slope apparatus with different circular slope degrees will be placed under the bottom basement and, if required, by centering on top of it.
In accordance with calculations compatible with lining material dimensions to be used, Premium Pedestals will be placed through positioning (joint) lath placed on the middle positioning hole with 90 degrees found on the top basement.
Therefore, each corner of paving stone will be placed on one fourth of Premium Pedestals.
For 12 positioning holes found on top basement allow the application to perform with 30 degrees, the holes on the edge will be used for inclined cut.
Calibration differences encountered in the coating material will be eliminated by using 1-2-3-4 mm calibration adjusting shims designed to be placed on Premium Pedestals and shims can also be used in case of need for noise isolation.
