PLUS-SHAPED JOINT STICK T-SP4
66.6
/Box/QTY in Box 400 Pcs
Mevcut
Details of Usage: Tile Flooring
Raw Material: Recycled Polypropylene (PP)
Unit Weight: 4.5 gr
PACKAGE INTERNAL PRODUCT AMOUNT: 400 PIECES
USED TO CREATE JOINT ON TOP OF THE PEDESTAL IN TILE FLOORINGS. WIDTH 4 MM.
The joint stick with a plus sign shape is placed on the central gap of the head part and has a width of 4 mm.
This product is designed to be broken down into pieces which allows it to be used easily in tricky floorings.
This product increases the speed of the process.
APPLICATIONS for Tile Flooring: Application can start from any corner.
More than one slope apparatus will be placed and used on the top of each other in line with slope ratio.
In this way, it will also allow high slopes to eliminate or reduce.
Slope apparatus with different circular slope degrees will be placed under the bottom basement and, if required, by centering on top of it.
In accordance with calculations compatible with lining material dimensions to be used, Premium Pedestals will be placed through positioning (joint) lath placed on the middle positioning hole with 90 degrees found on the top basement.
Therefore, each corner of paving stone will be placed on one fourth of Premium Pedestals.
For 12 positioning holes found on top basement allow the application to perform with 30 degrees, the holes on the edge will be used for inclined cut.
Calibration differences encountered in the coating material will be eliminated by using 1-2-3-4 mm calibration adjusting shims designed to be placed on Premium Pedestals and shims can also be used in case of need for noise isolation.
PACKAGE MEASUREMENT: 27X27X25,5 CM (8 Pieces in 12X12X12 Boxes)
NOT APPLICABLE TO THE AUXILIARY PRODUCTS
This product is designed to be broken down into pieces which allows it to be used easily in tricky floorings.
This product increases the speed of the process.
APPLICATIONS for Tile Flooring: Application can start from any corner.
More than one slope apparatus will be placed and used on the top of each other in line with slope ratio.
In this way, it will also allow high slopes to eliminate or reduce.
Slope apparatus with different circular slope degrees will be placed under the bottom basement and, if required, by centering on top of it.
In accordance with calculations compatible with lining material dimensions to be used, Premium Pedestals will be placed through positioning (joint) lath placed on the middle positioning hole with 90 degrees found on the top basement.
Therefore, each corner of paving stone will be placed on one fourth of Premium Pedestals.
For 12 positioning holes found on top basement allow the application to perform with 30 degrees, the holes on the edge will be used for inclined cut.
Calibration differences encountered in the coating material will be eliminated by using 1-2-3-4 mm calibration adjusting shims designed to be placed on Premium Pedestals and shims can also be used in case of need for noise isolation.
PACKAGE MEASUREMENT: 27X27X25,5 CM (8 Pieces in 12X12X12 Boxes)
NOT APPLICABLE TO THE AUXILIARY PRODUCTS
