FEATURES
– Excellent dimensional stability – no shrinkage and post-expansion.
– Excellent gap-filling properties
– Excellent adhesion on all building surfaces (except PE, PP and PTFE)
– High thermal and acoustic insulation values.
– Excellent installation performance.
APPLICATIONS
– Installation of door and window frames
– Filling gaps.
– Sealing roof constructions, filling gaps and openings.
– Creation of acoustic screens
– Creation of a soundproofing layer.
– Improvement of insulation in cold storage facilities
– All other common polyurethane foam applications
USAGE WARNINGS
Shake the can for approximately 30 minutes. Open the top cap and wear gloves as indicated. Place the applicator tube in an upright position.
Spray the surface, which must be clean and free of oil and dust, with light water.
Turn the can around and press the trigger to press the foam.
Fill the gaps by 30-40% as the foam will continue to expand during the hardening process.
Shake the can regularly during application.
If the foam is to be applied to several sheets, moisten between each layer of foam. At the end of the application, close the cap of the applicator tube with the closing plug and push it into the holder. Close the cap.
If properly closed, the can can be reused for up to 6 weeks.
Unhardened foam can be cleaned with foam cleaner or acetone. Hardened foam can only be cleaned mechanically.
Application temperature: +5°C to +30°C