Vertex Insulation Mesh
47.875
/Roll/QTY in Roll 50m²
Mevcut
It is a quality product made in Germany. 50M2 : TOP
SKU: EWA-TR-ESA-109-V2-726.2020.0011) Since the cement plaster is coated with a plaster mesh that is resistant to alkali effects, it does not melt or disappear in the plaster over time, and does not cause the plaster to crack.
2) It has 3.8×3.5 mm mesh. Since the mesh spaces are more frequent and have higher strength, it prevents the plaster from cracking.
3) 3.8×3.5 mm. close mesh, since the node thickness is thin, it is covered with a thinner plaster layer, providing a minimum of 750 gr. plaster savings per m2. This provides approximately 0.750×0.40=0.30 TL
SAVINGS PER SQUARE METER!
4) Net rolls are exactly 50 meters. No less than 47-48 meters like Chinese nets. You will not suffer any financial loss.
5) It does not cause any cracks during the application phase, it is very easy to open the roll and apply on the plaster.
When making cracks in Chinese mesh, the master tries to press the mesh onto the plaster with a trowel to place it, when this does not work, he cuts it with a cutter knife and places it.
This effort creates a difference of min. 0.25-0.30 TL/m2 in labor cost, and also causes cracks in the plaster where the mesh is cut. When these issues are taken into consideration, a saving of 0.60-0.65 TL per m2 is achieved in the total of “plaster cost + labor cost + loss due to lack of material” , which is the price difference between Vertex plaster mesh and Chinese plaster mesh, and also, high-quality VERTEX plaster mesh is used in the sheathing plaster, which is resistant to alkali, does not melt and disappear in the plaster over time, and does not cause cracks in the plaster.
2) It has 3.8×3.5 mm mesh. Since the mesh spaces are more frequent and have higher strength, it prevents the plaster from cracking.
3) 3.8×3.5 mm. close mesh, since the node thickness is thin, it is covered with a thinner plaster layer, providing a minimum of 750 gr. plaster savings per m2. This provides approximately 0.750×0.40=0.30 TL
SAVINGS PER SQUARE METER!
4) Net rolls are exactly 50 meters. No less than 47-48 meters like Chinese nets. You will not suffer any financial loss.
5) It does not cause any cracks during the application phase, it is very easy to open the roll and apply on the plaster.
When making cracks in Chinese mesh, the master tries to press the mesh onto the plaster with a trowel to place it, when this does not work, he cuts it with a cutter knife and places it.
This effort creates a difference of min. 0.25-0.30 TL/m2 in labor cost, and also causes cracks in the plaster where the mesh is cut. When these issues are taken into consideration, a saving of 0.60-0.65 TL per m2 is achieved in the total of “plaster cost + labor cost + loss due to lack of material” , which is the price difference between Vertex plaster mesh and Chinese plaster mesh, and also, high-quality VERTEX plaster mesh is used in the sheathing plaster, which is resistant to alkali, does not melt and disappear in the plaster over time, and does not cause cracks in the plaster.
