Cekomastik 740 Fast Curing Polyurethane Based Adhesive 280 ml
4.0625
/PcsAvailable
Cekomastik 740 is a single component, polyurethane based, fast curing adhesive that cures with air humidity and has excellent adhesion to iron sheet, aluminum, stainless steel, lead, copper, ceramic, glass, wood and many plastic surfaces.
PACKAGING 280 ml cartridge / 25 pieces in a box
PLACES USED
In the automotive sector, in the manufacture of vehicles such as cars, caravans, etc.
In the manufacturing and installation of ventilation ducts and air conditioning
As a sealant in the joints of rainwater collection pipes and rain gutters on roofs.
To reduce vibration in metal sheet joint works
To provide insulation in metal sheet joints
It is used to isolate water, gas, air and dust permeable spaces.
FEATURES
It has permanent elasticity.
It does not flow and has thixotropic properties.
It has no surface stickiness and does not retain dirt.
Does not cause shrinkage.
It can be easily applied and corrected with a gun.
PREPARATION BEFORE IMPLEMENTATION
The application surfaces must be solid, clean, dry, free of oil and dust. Non-porous surfaces such as glass and metal must be completely cleaned with solvent and completely free of paint or coating materials.
APPLICATION
Before using the cartridge, its mouth is cut and a plastic tip is attached.
The tip of the tip is cut and the cartridge is inserted into the gun.
The cartridge placed in the gun is applied in a way that does not leave any air.
It should not be applied on wet, frozen or constantly watered surfaces.
CLEANING AFTER APPLICATION
Contaminated areas and used tools should be cleaned with industrial gasoline (white spirit) or alcohol within 10 minutes.
After curing is completed, it is only cleaned mechanically.
PACKAGING
280 ml cartridge / 25 pieces in a box
STORAGE
Must be protected against water, frost and severe weather conditions.
It should be stored on wooden pallets in a cool and dry place.
Opened products should be consumed immediately.
A maximum of 8 boxes should be stacked on top of each other.
Storage life is maximum 1 year provided that the storage conditions specified above are observed.
In the automotive sector, in the manufacture of vehicles such as cars, caravans, etc.
In the manufacturing and installation of ventilation ducts and air conditioning
As a sealant in the joints of rainwater collection pipes and rain gutters on roofs.
To reduce vibration in metal sheet joint works
To provide insulation in metal sheet joints
It is used to isolate water, gas, air and dust permeable spaces.
FEATURES
It has permanent elasticity.
It does not flow and has thixotropic properties.
It has no surface stickiness and does not retain dirt.
Does not cause shrinkage.
It can be easily applied and corrected with a gun.
PREPARATION BEFORE IMPLEMENTATION
The application surfaces must be solid, clean, dry, free of oil and dust. Non-porous surfaces such as glass and metal must be completely cleaned with solvent and completely free of paint or coating materials.
APPLICATION
Before using the cartridge, its mouth is cut and a plastic tip is attached.
The tip of the tip is cut and the cartridge is inserted into the gun.
The cartridge placed in the gun is applied in a way that does not leave any air.
It should not be applied on wet, frozen or constantly watered surfaces.
CLEANING AFTER APPLICATION
Contaminated areas and used tools should be cleaned with industrial gasoline (white spirit) or alcohol within 10 minutes.
After curing is completed, it is only cleaned mechanically.
PACKAGING
280 ml cartridge / 25 pieces in a box
STORAGE
Must be protected against water, frost and severe weather conditions.
It should be stored on wooden pallets in a cool and dry place.
Opened products should be consumed immediately.
A maximum of 8 boxes should be stacked on top of each other.
Storage life is maximum 1 year provided that the storage conditions specified above are observed.
