PANEL CUTTING MACHINE/T-PE 433
74562.5
/pcsAvailable
Economical solutions for medium and small scale production facilities with precise cutting ability and trouble free operation.
General Features:
75 mm saw projection
Ergonomic working height.
Easy of usage.
Maximum business efficiency and low operating cost.
Powerful frame, high quality components and manufacturing quality provides minimum maintenance requirement.
7.5 kW Main Saw Motor
(BARCODE - 4200x4200 - 3000x3000 - 3800x3800)
Changing Saw:As standard in panel cutting machines, T-PE 433, the saw belt removal / installation system is available.Side SupportSide support is made of long and high strength rubber roller. This system provides precise squared cutting of the same time cutting on multiple plates with miter at the same time.Top SupportLinear sliders give precision in the pressure movement.Saw Carriage Guidance SystemIn the T-PE 433 panel cutting machine, the guidance system has a special design to ensure continuous motion without vibration. The movement of the guiding system is provided by the rack and pinion system.Remote Start – Emergency Stop
Functional Operator ScreenUSB memory and network access provide easy usage optimization software interface.
Barcode SystemBarcode labeling system, which is standard on all Turanlar panel cutting machines, writes all information about the features of the part for the workpiece onto the label.
Remote Access and Technical SupportWith the remote access feature that is standard in Turanlar's optimized panel cutting machines, it is possible to connect the machine computer to your computer either from your office or from a different place via the internet.
At the same time, if you want Turanlar Machinery Technical Service team also accessing your office computer or machine computer via the internet to solve problems or provide support. This virtual access means that your production process can continue while minimizing the inspection service.MINIFIX LINE:Thanks to the machine program and office optimization program that can be used in Turanlar sizing machines, barcode printing system is standard for flute drilling machine and works in cooperation with the drawing of projects and projects with a program in advance.
Safe and efficient working possibilities in a wide range of products:MDF / MDF Lam Panel.
Chipboard.
Plywood.
Compact Laminate.
Precast concrete panel.
Sheetrock.
Light Board.
Plastic panel.
Paper.
Main Cutting Screen:Turanlar branded software interface on all panel cutting machines provides easy to use main screen.
The program is suitable for use in other languages besides the Turkish language option.
Plot cut plan on main screen.
Cutting simulation.
Cutting speed automatic setting.
Saw cycle information.
Axis position information.
Be able to resume where you left off.
Easy access to service page.
It provides easy access to the settings page.
Cutting Project Preparation.
The preparation of a plant to be cut is carried out by means of an unlimited optimization program (PanelCut) supplied with the machine as standard.
It also provides the possibility of project preparation using the PanelCut Office program on an optional computer-independent computer. This operation does not occupy the machine.
Top Press:
The T-PE 434 and 435 panel cutting machines provide rapid movement and equal compression by sensitive slides. Rack balancing system is available for working with narrow workpieces.
Option: Top pressure works automatically step by step according to work piece thickness. This optional feature increases the cutting circle %5.
Functional Operator ScreenUSB memory and network access provide easy usage optimization software interface.
Barcode SystemBarcode labeling system, which is standard on all Turanlar panel cutting machines, writes all information about the features of the part for the workpiece onto the label.
Remote Access and Technical SupportWith the remote access feature that is standard in Turanlar's optimized panel cutting machines, it is possible to connect the machine computer to your computer either from your office or from a different place via the internet.
At the same time, if you want Turanlar Machinery Technical Service team also accessing your office computer or machine computer via the internet to solve problems or provide support. This virtual access means that your production process can continue while minimizing the inspection service.MINIFIX LINE:Thanks to the machine program and office optimization program that can be used in Turanlar sizing machines, barcode printing system is standard for flute drilling machine and works in cooperation with the drawing of projects and projects with a program in advance.
Safe and efficient working possibilities in a wide range of products:MDF / MDF Lam Panel.
Chipboard.
Plywood.
Compact Laminate.
Precast concrete panel.
Sheetrock.
Light Board.
Plastic panel.
Paper.
Main Cutting Screen:Turanlar branded software interface on all panel cutting machines provides easy to use main screen.
The program is suitable for use in other languages besides the Turkish language option.
Plot cut plan on main screen.
Cutting simulation.
Cutting speed automatic setting.
Saw cycle information.
Axis position information.
Be able to resume where you left off.
Easy access to service page.
It provides easy access to the settings page.
Cutting Project Preparation.
The preparation of a plant to be cut is carried out by means of an unlimited optimization program (PanelCut) supplied with the machine as standard.
It also provides the possibility of project preparation using the PanelCut Office program on an optional computer-independent computer. This operation does not occupy the machine.
Top Press:
The T-PE 434 and 435 panel cutting machines provide rapid movement and equal compression by sensitive slides. Rack balancing system is available for working with narrow workpieces.
Option: Top pressure works automatically step by step according to work piece thickness. This optional feature increases the cutting circle %5.
