Peronat - Perlite Plaster
Gypsum based ready-to-use plaster. It can be applied directly on materials such as brick, concrete, exposed concrete, aerated concrete, pumice block. Peronat is a Class A1 fireproof material that provides sound insulation.
technical specifications and the TSE standard:
Physical Form: White powder
Plaster/Water Rate: 10 Kg to 5.5-6 Liters of water
Usage Period :60-90 Minutes
Freezing Period: 180-230 Minutes
Dry Unit Weight: 800-850 Kg/m³
Consumption Amount: 8.5-9 kg/m² ( at each 1 cm )
Compression Strength ≥ 2 N/mm²
Flexural Strength ≥ 10 N/mm²
Reaction to Fire :A1
Related Standard:TS EN 13279-1.2 ( Type B4- Hand Applied )
surface and environmental conditions:
It should be free of dirty material such as dust, oil and paint
The surfaces such as extremely dry, hot and highly absorbent should be moisturized with water
The surfaces of the ceiling should be roughened before applying the plaster or undercoated with material to ensure attachment of the mortar
It should be paid attention that there is no air current and circulation in the environment during application
The application temperature should be between +5 to +40 °C.packaging:
Polypropylene bags of 35 kg ( % ± 2 )
application:
5,5-6,0 liters of clean water is down into mixture bowl; 10kgs of PERONAT plaster is added by sprinkling into the water. It is awaited for a period of approximately 2-3 minutes in order to the plaster absorbs the water
It is mixed with a hand mixer or with the help of a trowel in order to obtain a homogenous mixture
The prepared morter is applied on the surface by a steel trowel.storage:
At most 15 bags should be stockpiled one on another at a dry place
The bags must not be in contact with the floor and they must be protected from humidity and condensation
It must be used within 6 months after production date
It should be free of dirty material such as dust, oil and paint
The surfaces such as extremely dry, hot and highly absorbent should be moisturized with water
The surfaces of the ceiling should be roughened before applying the plaster or undercoated with material to ensure attachment of the mortar
It should be paid attention that there is no air current and circulation in the environment during application
The application temperature should be between +5 to +40 °C.packaging:
Polypropylene bags of 35 kg ( % ± 2 )
application:
5,5-6,0 liters of clean water is down into mixture bowl; 10kgs of PERONAT plaster is added by sprinkling into the water. It is awaited for a period of approximately 2-3 minutes in order to the plaster absorbs the water
It is mixed with a hand mixer or with the help of a trowel in order to obtain a homogenous mixture
The prepared morter is applied on the surface by a steel trowel.storage:
At most 15 bags should be stockpiled one on another at a dry place
The bags must not be in contact with the floor and they must be protected from humidity and condensation
It must be used within 6 months after production date
