Pipe Sealant High Strength PSHS
PSHS Pipe Sealant High Strength is a low-medium viscosity and high strength anaerobic pipe sealant. Thixotropic formulation reduces run-off and migration of the product before assembly.
minimum order 3000 piece.
Features:It can be easily applied to threaded joints and removed easily with hand tools.With its specialized formulation,PSHS can be used applications where high pressure proof or oil resistance is required.Especially suitable for H-thick metal threaded joints according to EN 751-1 standard.The product resists high temperatures with maintaining high strength.
Application Areas:Clean male and female threads before assembly with an absorbent tissue paper to remove any cutting oil.Apply the adhesive with a 360 turn to leading threads of the male and female fittings.Use an absorbent tissue paper to wipe off excess jointing compound in the direction of the thread.Assembly parts and hold on for 24 hours at 22-24°C to ensure full curing of jointing compound.For disassembly,use hand tools to remove mating parts. When it is hard to dissemble at room temperature,apply local heat until reaching 250°C and disassemble while hot. Then,remove any residual cured adhesive mechanically and clean parts with a proper solvent,acetone.
Application Areas:Clean male and female threads before assembly with an absorbent tissue paper to remove any cutting oil.Apply the adhesive with a 360 turn to leading threads of the male and female fittings.Use an absorbent tissue paper to wipe off excess jointing compound in the direction of the thread.Assembly parts and hold on for 24 hours at 22-24°C to ensure full curing of jointing compound.For disassembly,use hand tools to remove mating parts. When it is hard to dissemble at room temperature,apply local heat until reaching 250°C and disassemble while hot. Then,remove any residual cured adhesive mechanically and clean parts with a proper solvent,acetone.
