Galvanized Special - Shaped Tubes
Boray Boru produces special shaped profiles in accordance with TS 5317 / DIN 2395 / EN 10219-1 / EN 10305 standards.
Production can be made in various thicknesses with galvanized raw material. Profile surfaces are covered with protective oil. Profiles are subjected to crushing and mouth expansion tests in accordance with TSE standards.
CUSTOM LENGHT:In accordance with the demands of our customers, up
to 12 meters can be produced in desired length. This
ensures optimum transport, storage and handling.
CUSTOM THICKNESS:It can be produced in thicknesses ranging from 0.8 mm to 5.0 mm. Due to the process of rolling, the products in required thickness are prepared in the required length.
CUSTOM SIZE:Production can be done in desired dimensions in accordance with demand. Width and height are produced according to the exact size required in the production range possible.
Desired Height Between 20x80
Desired Width Between 15x70
ADDITIONAL PROTECTION COATING:Depending on customer request, additional protection coating can be applied on the outer surface of products to increase the products validity. Special packaging (jute) can be made upon request.
If sufficient tonnage is demanded, different shapes can be produced.
CUSTOM THICKNESS:It can be produced in thicknesses ranging from 0.8 mm to 5.0 mm. Due to the process of rolling, the products in required thickness are prepared in the required length.
CUSTOM SIZE:Production can be done in desired dimensions in accordance with demand. Width and height are produced according to the exact size required in the production range possible.
Desired Height Between 20x80
Desired Width Between 15x70
ADDITIONAL PROTECTION COATING:Depending on customer request, additional protection coating can be applied on the outer surface of products to increase the products validity. Special packaging (jute) can be made upon request.
If sufficient tonnage is demanded, different shapes can be produced.
