AREAS OF USE
In interior and exterior spaces, vertical and horizontal applications
In mortar, plaster and screed
It is used as an adhesion additive in mortars prepared for repair purposes.
In Plaster Mortars
It is used as an additive to increase adhesion and water impermeability in the interior and exterior plasters of reinforced concrete silos, water tanks, pools and treatment plants.
PCC (Polymer Cement Concrete) Primer in Screeds
It is used to prevent cold joint formation and increase adhesion in new concrete or screed applications on old concrete.
In the screeds; To obtain high adherence and crack-free surfaces even on 2 cm thick screeds; It is used together with MELMENT® L 10/33 to prevent dusting, cracking and to increase water impermeability on industrial floors.
In Coating Mortars It is used as an additive to prevent mortars prepared for laying natural stones, bricks and tile slabs in outdoor areas from being affected by the Freeze-Thaw cycle.
In the Preparation of Sprinkling Plaster
On concrete or aerated concrete surfaces with a smooth surface finish
It is used to increase the adhesion in the sprinkled plaster before plaster and ceramic applications.
ADVANTAGES
It creates a strong and lasting bond.
Provides excellent adhesion and impermeability.
Increases resistance to water, oil and salt solutions.
Increases resistance to freeze-thaw cycles.
It reduces stresses in large areas by increasing the tensile strength in bending.
Provides crack-free hardening with reduced shrinkage.
Provides resistance to saponification and does not contain additives that cause corrosion.