Kulemod® Sleeve | Formwork Scaffolding
TOWER TYPE SHORING SCAFFOLDING SYSTEM
Kulemod® Sleeve scaffolding system is generally used as formwork support in structures with high floor heights and large slab thicknesses. Sleeve scaffolding system has a very practical installation and a rigid structure with only 4 pieces.
System Features:
» H Elements are produced from Ø48x3 mm industrial pipe.
» Depending on the project, there are options of 100cm x 100cm or 120cm x 120cm widths.
» TSE certified, mechanically compliant pipes are used throughout the system.
» Welded joints are made by certified welders with gas welding.
Kulemod Scaffolding System Module Elements:
1 - Steel Frame
2 - Steel H Element
3 - Steel End Element
4 - Steel Lower Adjustment Shaft
5 - Steel Upper Adjustment Shaft
6 - Steel Four-Way Head
» H Elements are produced from Ø48x3 mm industrial pipe.
» Depending on the project, there are options of 100cm x 100cm or 120cm x 120cm widths.
» TSE certified, mechanically compliant pipes are used throughout the system.
» Welded joints are made by certified welders with gas welding.
Kulemod Scaffolding System Module Elements:
1 - Steel Frame
2 - Steel H Element
3 - Steel End Element
4 - Steel Lower Adjustment Shaft
5 - Steel Upper Adjustment Shaft
6 - Steel Four-Way Head
