Our ready-to-use, rubber and fiber-containing Izopak Liquid Membranes used for moisture and water insulation are among the primary choices of our valued customers, just like our other products, thanks to their economy and high quality. Advantages: a) It is a perfect product produced with the latest technology in water insulation. b) It is 100% flexible, fills the capillary gaps on the surfaces used. c) It provides an insulation without joints d) It is economical e) It is long-lasting f) It is applied cold g) It is easy and practical to apply h) Felt and mesh are applied in places requiring high strength ı) It provides high adhesion between different building materials i) Its surface can be painted Areas of use : : a) On terrace roofs, b) In wet areas (bathrooms, kitchens, toilets, etc.), c) In hidden streams, d) In balconies, porches and similar places, e) On the north facades of buildings, f) Under paint with its paintable feature, g) In the protection of metal surfaces with its rust-preventive feature. Setting time: 1) The first thinned coat applied as the first layer will crust after 2-3 hours, 2) the second coat will crust after approximately 2-3 hours, 3) It will fully set after 24-36 hours, depending on the air temperature. Homogenization of the Material: Before application, the liquid membrane in the bucket must be thoroughly homogenized. It should be mixed with a suitable mechanical mixer. Thinner or gasoline can be used to dilute the transparency of the material. The application of the material does not depend on the temperature of the air, it can be applied even on the hottest summer day and the coldest winter day. Preparation of the Application Surface: Mortar crumbs, loose concrete pieces and all kinds of foreign materials on the surface must be cleaned.