PAL-3 Felt Foiled Bituminous Insulation Water Insulation Membrane Technical Details PAL-3 Felt and aluminum foil bituminous waterproofing membrane is manufactured by coating the fiberglass carrier with APP (Atactic Polypropylene) added bitumen asphalt bitumen. One side is coated with polyethylene film and the other side is coated with aluminum foil. PAL-3 felt foiled fibroglass waterproofing membrane is generally used in insulation points requiring foiled waterproofing insulation on roofs, chimney bases, building joints. Insulation Insulation Membrane Usage Area Felt foil insulation insulation membrane in the joints of buildings, chimney bottom insulation and building dilatations, foundation curtain insulation, where insulation insulation is required in bundling. Foil insulation membrane in parking lot terraces and sloping roofs, insulation insulation membrane Lower insulation of tiles and ceramics. Balcony, flower bed, terrace garden insulation where insulation is required. Felt foil membrane is used in concrete canals. At the same time, foil insulation insulation membrane is used in rain gutters and hidden gutters. Felt foil insulation membrane retaining and basement walls, waste water treatment plants and pressurized underground waters. Felt foil membrane water tank insulation insulation. It is used in pond, swimming and ornamental pool insulation insulation. Felt foil membrane insulation is used in wet volume spaces such as kitchen, bathroom, WC, insulation and insulation membrane. Water Insulation Membrane Product Advantages Felt insulation membrane is flexible and durable. PAL-3 felt insulation membrane can be easily applied to different types of surfaces. Insulation insulation membrane has high tensile and tear strength. Felt insulation membrane is resistant to adverse conditions that may occur in the soil. Water insulation membrane is easily applied in details such as dilatation, chimney edge and parapet return. Insulation Water Insulation Membrane Surface Preparation The ground where the insulation membrane will be applied is cleaned from loose parts, oil and other chemicals. Surface defects are repaired with Starfix repair mortar. For a healthy application, it is recommended to use Izopak waterproofing membrane primer bitumen emulsion as a primer on the surface to be applied. Felt Foiled Bituminous Water Insulation Membrane Application Details Felt foil bituminous insulation waterproofing membrane is applied by making 10 cm or 15 cm overlap at the joints. At the end of the roll, 15 cm overlap is made and the bituminous waterproofing membrane is heated and adhered to the entire surface with a torch flame. Insulation Bituminous Water Insulation Membrane Storage and Matters to be Considered Waterproofing membrane rolls must definitely be stored vertically. Membrane rolls must be protected from direct sunlight. After the insulation application is completed, drilling and cutting operations must not be performed. Insulation membrane applied to the terraces that are visited must be protected with floor covering.