Bituminous Insulation Water Insulation Membrane Technical Details F-2 bituminous waterproofing membranes are made of fiberglass reinforced glass tissue carrier, APP (Atactic Polypropylene) additive, both sides are coated with polyethylene film and are obtained by saturating the carrier with bitumen asphalt. F-2 Fibroglass waterproofing membrane is generally used on roofs, pergolas and insulation points that require waterproofing insulation. Insulation Insulation Membrane Usage Area Insulation insulation membrane toki kiptaş project foundation curtain insulation and bundling insulation, in projects' parking terraces and sloping roofs. Tile ceramic sub-insulation. balcony, flower bed, terrace garden insulation. concrete canals, rain gutters and hidden gutters. Some project retaining and basement walls, wastewater treatment plants and pressurized underground water in state projects. Water tank insulation insulation. It is used in pond, swimming and ornamental pool insulation insulation and insulation. Water Insulation Membrane Product Advantages Insulation insulation membrane is flexible and long-lasting. It can be easily applied to different types of surfaces in Toki Kiptaş project membrane applications. Insulation insulation membrane has high tensile and tear strength. Insulation membrane is resistant to adverse conditions that may occur in the soil. Water insulation membrane is easily applied in details such as dilatation, chimney edge and parapet return. Insulation Water Insulation Membrane Surface Preparation The ground on which the insulation membrane will be applied is cleaned from loose parts, oil and other chemicals. Surface defects are repaired with Starfix repair mortar. For a healthy application, it is recommended to use Isopak waterproofing membrane primer bitumen emulsion as a primer on the surface to be applied. The ground on which the insulation membrane will be applied is cleaned from loose parts, oil and other chemicals. Surface defects are repaired with Starfix repair mortar. For a healthy application, it is recommended to use Isopak waterproofing membrane primer bitumen emulsion as a primer on the surface to be applied. Bituminous Water Insulation Membrane Application Details Bituminous insulation waterproofing membrane is applied by making 10 cm or 15 cm overlap at the joints. At the end of the roll, 15 cm overlap is made and the bituminous waterproofing membrane is heated and adhered to the entire surface with a torch flame. Insulation Bituminous Water Insulation Membrane Storage and Matters to be Considered Waterproofing membrane rolls must definitely be stored vertically. Membrane rolls must be protected from direct sunlight. After the insulation application is completed, drilling and cutting operations must not be performed. Insulation membrane applied terraces that are visited must be protected with floor covering.