PAR-50K Slate Stone Coated Red/Green Polyester Felt Bituminous Insulation Water Insulation Membrane Technical Details PAR-50K Slate stone coated polyester felt bitumen waterproofing membrane is obtained by coating polyester felt with APP (Atactic Polypropylene) added bitumen penetration asphalt. Polyester felt membrane is obtained by finishing process with one side coated with polyethylene film and the other side coated with slate mineral stone. PAR-50K slate membrane polyester felt waterproofing membrane is generally used on roofs, pergolas and insulation points requiring waterproofing insulation. Insulation Insulation Membrane Usage Area Slate sandy polyester felt insulation insulation membrane foundation curtain insulation, where insulation insulation is required in bundling. Slate membrane insulation projects in toki kiptaş and state projects in parking lot terraces and sloping roofs, sandy insulation insulation membrane tile ceramics bottom insulation. Balcony, flower bed, terrace garden insulation where insulation is required. It is used in concrete canals. At the same time, slate felt insulation membranes are used in rain gutters and hidden gutters. Slate sandy polyester felt insulation membrane retaining and basement walls, wastewater treatment plants and pressurized underground water. water tank insulation insulation. It is used in pond, swimming and ornamental pool insulation insulation. Sandy slate felt membrane insulation is used in the insulation and insulation of wet areas such as kitchen, bathroom, toilet. Water Insulation Membrane Product Advantages Slate sanded felt insulation membrane is flexible and long-lasting. PAR 50-K sanded slate coated felt insulation membrane can be easily applied to different types of surfaces. Insulation insulation membrane has high tensile and tear strength. Felt Insulation membrane is resistant to adverse conditions that may occur in the soil. Water insulation membrane is easily applied in details such as dilatation, chimney edge and parapet return. Insulation Water Insulation Membrane Surface Preparation The ground where the slate stone sand coated insulation membrane will be applied is cleaned from loose parts, oil, dust and other chemicals. Surface defects are repaired with Starfix Repair Mortar. For a healthy application of the insulation membrane, it is recommended to use Izopak waterproofing membrane primer bitumen emulsion as a primer on the surface to be applied. Bituminous Water Insulation Membrane Application Details Polyester felt slate stone coated bituminous insulation waterproofing membrane is applied by making 10 cm or 15 cm overlap at the joints. At the end of the roll, 15 cm overlap is made and the bituminous waterproofing membrane is heated and adhered to the entire surface with a torch flame. Insulation Bituminous Water Insulation Membrane Storage and Matters to be Considered Waterproofing membrane rolls must definitely be stored vertically. Membrane rolls must be protected from direct sunlight. After the insulation application is completed, drilling and cutting operations must not be performed. Insulation membrane applied to the terraces that are visited must be protected with floor covering.