Derzonate - Joint Filler Plaster
Decorative, filling component that can be used to fill joint parts which has high strength and flexibility.
technical specifications and the TSE standard:
Physical Form: White powder
Plaster/Water Rate: 10 Kg to 5,5-6 Liters of water
Usage Period: 80-120 Minutes
Freezing Period: 120-180 Minutes
Dry Unit Weight: 650-750 Kg/m³
Consumption Amount: 0.8-1 Kg/m2 ( at each 1 cm )
Compression Strength ≥ 2N/mm²
Flexural Strength ≥ 1 N/mm²
Reaction to Fire: A1Related Standard:TS EN 13963 Type 3B (Joint material for the plaster boards)
application of the surface and environment:
The plaster plate installation procedures should be completed before using DERZONAT
Application temperature should be between +5 and +40 °C
There should not be air flow and air circulation in the environment during the application.
packaging:
Polypropylene bags of 25 kg ( % ± 2 )application:
5,5-6 liters of water is poured down into the mixture bowl; 10 kgs of DERZONAT plaster is added by sprinkling into water
It is awaited for a period of approximately 2-3 minutes in order to cause the plaster to absorb the water
It is mixed with a hand mixer or with the help of a trowel in order to obtain a homogenous mixture. If self-adhesive seam band is to be used the first layer of application is made after affixing the band
If self-adhesive seam band is not to be used, the first layer of DERZONAT is applied in such a way to fill the joints of the seam and seam band is afficed, and then the second layer of application is made
After DERZONAT dried, checking is made if necessary
storage:
At most 20 bags should be stockpiled one on another at a dry place.
The bags must not be in contact with the floor and they must be protected from humidity and condensation.
It must be used within 6 months after production date
The plaster plate installation procedures should be completed before using DERZONAT
Application temperature should be between +5 and +40 °C
There should not be air flow and air circulation in the environment during the application.
packaging:
Polypropylene bags of 25 kg ( % ± 2 )application:
5,5-6 liters of water is poured down into the mixture bowl; 10 kgs of DERZONAT plaster is added by sprinkling into water
It is awaited for a period of approximately 2-3 minutes in order to cause the plaster to absorb the water
It is mixed with a hand mixer or with the help of a trowel in order to obtain a homogenous mixture. If self-adhesive seam band is to be used the first layer of application is made after affixing the band
If self-adhesive seam band is not to be used, the first layer of DERZONAT is applied in such a way to fill the joints of the seam and seam band is afficed, and then the second layer of application is made
After DERZONAT dried, checking is made if necessary
storage:
At most 20 bags should be stockpiled one on another at a dry place.
The bags must not be in contact with the floor and they must be protected from humidity and condensation.
It must be used within 6 months after production date
