Yaponat - Adhesive Plaster
It is an adhesive plaster which has high adhesive, flexible, strong features and offers decorative visuality. The adhesive can be applied on the surface of the boards to stick on the gas concrete and bricks.
technical specifications and the TSE standard:
Physical Form: White powder.
Plaster/Water Rate :10 Kg to 5.5 Liters of water.
Usage Period: 60-90 Minutes.
Freezing Period :100-150 Minutes.
Dry Unit Weight: 650-750 Kg/m³.
Compression Strength ≥ 2 N/mm².
Flexural Strength ≥ 1 N/mm².
Bond Strength: 0.06 Mpa.
Reaction to Fire Class: A1.
Related Standard :TS EN 14496 (Gypsum Based Adhesive )
surface and environmental conditions:
It should be free of dirty material such as dust, oil and paint
The surfaces such as extremely dry, hot and highly absorbent should be moisturized with water
It should be paid attention that there is no air flow and air circulation in the environment during the application
The application temperature should be between +5 and +40 °C .
packaging:
Polypropylene bags of 25 kg ( % ± 2 )
application:
5-5,5 liters of water is poured down into the mixture bowl; 10 kgs of YAPONAT plaster is added by sprinkling into water
It is awaited for a period of approximately 2-3 minutes in order to cause the plaster to absorb the water
It is mixed with a hand mixer or with the help of a trowel in order to obtain a homogenous mixture
The prepared mortar should be applied to the surfaces with enough intervals and lumps
After the sticking process, the smoothness of the surface should be controlled.
storage:
At most 20 bags should be stockpiled one on another at a dry place
The bags must not be in contact with the floor and they must be protected from humidity and condensation
It must be used within 6 months after production date.
It should be free of dirty material such as dust, oil and paint
The surfaces such as extremely dry, hot and highly absorbent should be moisturized with water
It should be paid attention that there is no air flow and air circulation in the environment during the application
The application temperature should be between +5 and +40 °C .
packaging:
Polypropylene bags of 25 kg ( % ± 2 )
application:
5-5,5 liters of water is poured down into the mixture bowl; 10 kgs of YAPONAT plaster is added by sprinkling into water
It is awaited for a period of approximately 2-3 minutes in order to cause the plaster to absorb the water
It is mixed with a hand mixer or with the help of a trowel in order to obtain a homogenous mixture
The prepared mortar should be applied to the surfaces with enough intervals and lumps
After the sticking process, the smoothness of the surface should be controlled.
storage:
At most 20 bags should be stockpiled one on another at a dry place
The bags must not be in contact with the floor and they must be protected from humidity and condensation
It must be used within 6 months after production date.
