Satonat - Satin Finishing Plaster-adhesive
With its high adhesive power, Satonat is last coat polish that can be used on gypsum and Onatpan plasterboard surfaces which plastered by Peronat and Makonat. It is Class A1 - fireproof component.
technical specifications and the TSE standard:
Physical Form: White powder
Plaster/Water Rate: 10 Kg to 6.5-7 Liters of water
Usage Period :120-160 Minutes
Freezing Period: 200-250 Minutes
Dry Unit Weight: 650-750 Kg/m³
Consumption Amount: 0.8-1 kg/m² ( at each 1 cm )
Compression Strength ≥ 2 N/mm²
Flexural Strength ≥ 10 N/mm²
Reaction to Fire :A1
Related Standard:TS EN 13279-1.2 ( TypeC6- Light applicable surface plaster)
surface and environmental conditions:
It should be free of dirty material such as dust, oil and paint
The surfaces such as extremely dry, hot and highly absorbent should be moisturized with water
The surfaces of the ceiling should be roughened before applying the plaster or undercoated with material to ensure attachment of the mortar
It should be paid attention that there is no air flow and circulation in the environment during application
The application temperature should be between +5 to +40 °C.packaging:
Polypropylene bags of 25 kg ( % ± 2 )application:
6,5- 7 liters of clean water is down into mixture bowl; 10 kg of SATONAT plaster is added by sprinkling into the water
It is awaited for a period of approximately 2-3 minutes in order to cause the plaster to absorb the water
It is mixed with a hand mixer or with the help of a trowel in order to obtain a homogenous mixture
The prepared morter is applied on the surface by a steel trowel.
It should be free of dirty material such as dust, oil and paint
The surfaces such as extremely dry, hot and highly absorbent should be moisturized with water
The surfaces of the ceiling should be roughened before applying the plaster or undercoated with material to ensure attachment of the mortar
It should be paid attention that there is no air flow and circulation in the environment during application
The application temperature should be between +5 to +40 °C.packaging:
Polypropylene bags of 25 kg ( % ± 2 )application:
6,5- 7 liters of clean water is down into mixture bowl; 10 kg of SATONAT plaster is added by sprinkling into the water
It is awaited for a period of approximately 2-3 minutes in order to cause the plaster to absorb the water
It is mixed with a hand mixer or with the help of a trowel in order to obtain a homogenous mixture
The prepared morter is applied on the surface by a steel trowel.
