Makonat Eco - Machine Plaster
Gypsum based ready-to-use plaster. It can be applied directly on materials such as brick, concrete, exposed concrete, aerated concrete, pumice block. Peronat is a Class A1 fireproof material that provides sound insulation.
technical specifications and the TSE standard:
Physical Form: White powder
Plaster/Water Rate: 10 Kg to 4-4.5 Liters of water
Usage Period :130-180 Minutes
Freezing Period: 250-300 Minutes
Dry Unit Weight: 900-1000 Kg/m³
Consumption Amount: 11-12 kg/m² ( at each 1 cm )
Compression Strength ≥ 2 N/mm²
Flexural Strength ≥ 10 N/mm²
Reaction to Fire :A1
Related Standard:TS EN 13279-1.2 ( Type B4 Machine applied)
surface and environmental conditions:
It should be free of dirty material such as dust, oil and paint
The surfaces such as extremely dry, hot and highly absorbent should be moisturized with water
The surfaces of the ceiling should be roughened before applying the plaster or undercoated with material to ensure attachment of the mortar
It should be paid attention that there is no air flow and circulation the environment during application
The application temperature should be between +5 to +40 °C
packaging:
Polypropylene bags of 35 kg ( % ± 2 )
application:
Appropriate amount of plaster is prepared as (4-5 liters of water / 10 kg MAKONATEKO) proportion in the plastering machine
The mortar is sprayed onto the surface by machine
The application thickness has been determined with the help of plaster strip in accordance with the smoothness of the surface
The mortar is flatted through surface finishing
When the surface starts hardening, it is flattedwith the help of a steel trowel
When a light pressure is applied on the surface, if it does not subside, trifilling process can be started
After trifilling process, polishing is made again with a steel trowel and the surface is made ready for painting
storage:
At most 15 bags should be stockpiled one on another at a dry place
The bags must not be in contact with the floor and they must be protected from humidity and condensation
It must be used within 6 months after production date
It should be free of dirty material such as dust, oil and paint
The surfaces such as extremely dry, hot and highly absorbent should be moisturized with water
The surfaces of the ceiling should be roughened before applying the plaster or undercoated with material to ensure attachment of the mortar
It should be paid attention that there is no air flow and circulation the environment during application
The application temperature should be between +5 to +40 °C
packaging:
Polypropylene bags of 35 kg ( % ± 2 )
application:
Appropriate amount of plaster is prepared as (4-5 liters of water / 10 kg MAKONATEKO) proportion in the plastering machine
The mortar is sprayed onto the surface by machine
The application thickness has been determined with the help of plaster strip in accordance with the smoothness of the surface
The mortar is flatted through surface finishing
When the surface starts hardening, it is flattedwith the help of a steel trowel
When a light pressure is applied on the surface, if it does not subside, trifilling process can be started
After trifilling process, polishing is made again with a steel trowel and the surface is made ready for painting
storage:
At most 15 bags should be stockpiled one on another at a dry place
The bags must not be in contact with the floor and they must be protected from humidity and condensation
It must be used within 6 months after production date
